Optometrist compensation plans: base salary, production pay and hybrid models
How to structure associate optometrist pay: salary vs production vs hybrid, the production base, the percentage, guarantees and draws, bonus thresholds, and the arithmetic behind each.
SOC 29-1041, OEWS May 2025 — employees only
BLS median, payroll ODs in offices of optometrists
$129,250/yr
SOC 29-1041, OEWS May 2025 — employees only
BLS median, payroll ODs, all industries
$136,570/yr
NAICS 456100; also includes pharmacies and other health retailers
BLS median, health & personal care retailers row
$159,460/yr
Average collection rate on billings, 2021 data; self-selected respondents
Collections vs billings (AOA survey)
84%
This guide sorts optometrist compensation plans for associates into three working patterns: a straight salary, a percentage of production, and a hybrid that pairs a base with production upside. It walks through each pattern from the practice's side — what counts as production, how to set the percentage, how guarantees and draws work, where bonus thresholds fit, and the arithmetic of a worked example.
Salary vs production vs hybrid
The three patterns differ in who carries the risk of a slow schedule and who captures the upside of a strong one.
A straight salary pays a fixed amount for the schedule, whatever the associate produces.
A production model pays from what the associate's work brings in, as a percentage.
A hybrid pairs the two: a base with a production share on top, or the greater of a base or a production amount.
Straight salary is the simplest to run.
Your cost is fixed, the associate's income is predictable, and no one argues about what counted as production.
The trade-off runs both ways: the practice absorbs the downside of a light schedule, and the associate gives up the upside of a busy one.
Production pay moves both parties with revenue.
The associate's check follows the patients seen and the money the practice actually collects, so a productive associate earns more and the practice's cost flexes with its collections.
The price is administration: the plan has to define the measurement, and the associate carries income risk you will be asked to soften.
A hybrid splits the difference.
The base covers the associate's floor and the production share pays for upside — either added on top of the base or structured as the greater of the two, so pay never drops below the base but rises with production.
The worked examples at the end of this page show the arithmetic.
Public pay data helps you sanity-check where an offer lands, not design the formula.
In the Bureau of Labor Statistics' Occupational Employment and Wage Statistics for May 2025, optometrists (SOC 29-1041) employed in offices of optometrists (NAICS 621320) had a median wage of $129,250 a year, and the middle half earned between $102,740 and $160,350.
Across all industries, the median was $136,570.
Those medians cover payroll optometrists only: the OEWS survey counts employees, so self-employed owners and sublease ODs sit outside the figures.
They describe what employers across the country pay employed ODs — a floor-and-ceiling check on a salary or a hybrid base, not a template for any model.
The industry rows show how wide the settings run.
Payroll optometrists in the health and personal care retailers industry row (NAICS 456100, which also includes optical goods retailers, pharmacies and other health retailers) had a median of $159,460.
Those in offices of physicians (NAICS 621100, which includes ophthalmology practices) had a median of $145,630.
An industry row is a bucket of employers, not a pay structure, and none of these figures describes a compensation model.
Pay is one lever in hiring for your optometry practice — the models below only hold up inside a role definition, a schedule and a recruiting plan that fit the practice.
For the other side of the table, our career guide for associate optometrists covers what associates weigh when they compare offers.
What counts as production
Production is whatever the plan says it is, and the plan has to say it precisely.
Before any percentage is discussed, decide the measurement basis and the revenue lines it covers, and write both into the compensation clause of the contract.
The first decision is the basis: charges or collections.
A percentage of gross charges pays on what is billed for the associate's work; a percentage of collections pays on what the practice actually receives.
The two bases diverge wherever claims deny, plans reimburse below charges and patient balances go unpaid — in the AOA's 2022 Survey of Optometric Practice, owner respondents reported collecting an average of 84% of billings (2021 data, from a self-selected sample).
Because the associate does not control how quickly a payer remits or whether a claim denies, the basis shifts risk between the practice and the associate.
Whichever you choose, the plan should also say how refunds and adjustments are handled — whether they reduce the associate's production, and in which measurement period.
The second decision is scope: which revenue lines count.
Comprehensive exams, follow-up visits, contact lens fits and medical visits can each sit inside or outside the base.
Optical sales and dispensed contact lenses are their own question — pulling retail revenue into the base changes both the number the percentage multiplies and the percentage the practice can sustain, so the two have to be read as a set.
The revenue base is genuinely mixed, which is why the scope decision matters.
In the same AOA survey, owner respondents reported gross billings coming from direct patient payment (31%), vision plans (30%), private medical insurance (23%), government programs (16%) and other sources (3%), as the survey printed them.
A production definition that counts some of those streams and not others is a design choice with real consequences for the associate's check.
Attribution is the third decision: whose production is a visit when two doctors share the patient.
Referrals, follow-ups on a patient someone else started and co-managed cases all need a rule written before the associate starts, not negotiated case by case afterward.
The test of a good production clause is whether a new associate could read it and compute their own check.
Anything that needs a conversation to interpret — "production," "collections," "the associate's patients" — is a dispute scheduled for a year from now.
Setting the percentage
Start with the honest answer: our research found no verified public benchmark for associate optometrist production percentages.
A figure you cannot trace to a source is a negotiation position, not data.
Build the number from the practice's own arithmetic, and treat any outside figure as a starting point for a conversation you can defend.
The arithmetic runs backward from what the practice can pay.
Pull three numbers from your own books: the collected revenue the associate's schedule can reasonably generate in a year, the total compensation the practice can sustain at that revenue, and the expenses that revenue has to cover first.
The percentage is what falls out when you divide the second number by the first — and it only means something alongside the base and the production definition it attaches to.
Test the percentage at both ends before committing.
Multiply it against a light month and a heavy month, not just the average year.
A percentage that pays well at strong production but collapses in a slow month is a plan for turnover; the guarantees and draws in the next section are how you manage that spread.
Keep the components separate: the percentage, the base it applies to, and the measurement period.
The same dollar outcome can come from a higher percentage on a narrower base or a lower percentage on a wider one, which is why quoting a percentage without its base tells you nothing.
The market check is direct: read how competing postings in your area describe pay — including where a posting names its numbers and where it stays quiet — and calibrate against what candidates actually accept.
Guarantees and draws
A guarantee is a fixed minimum the practice pays for a defined period, whatever the associate produces.
The clearest case is a new graduate ramping into a full schedule: the guarantee covers the ramp, and the plan converts to the production formula — or to a hybrid — on the terms the contract sets.
State whether the guarantee ends on a date or on a production milestone, because the two can land months apart.
A draw is different money.
It is an advance against production the associate has not yet earned: production pays the draw back first, and the plan specifies whether a shortfall carries forward into future periods.
A recoverable draw works as an advance; a non-recoverable draw works as a floor.
The greater-of structure is the simplest floor to administer: the associate earns the base or the production amount, whichever is larger, with no repayment mechanics and no reconciliation.
The worked examples at the end of this page run a greater-of plan and a straight percentage side by side.
How a plan pays also has wage-and-hour consequences.
Under the FLSA regulation 29 CFR 541.304, licensed optometrists who are actually practicing are exempt learned professionals under the practice-of-medicine rule.
The federal salary-level and salary-basis requirements do not apply to them, so an employed OD paid hourly or per diem can still be overtime-exempt under federal law.
State law can differ — California is one example — and an independent-contractor arrangement is a separate question.
Whether a particular associate's position meets an exemption is a classification question, not a label — confirm it with employment counsel or the DOL's Wage and Hour Division before you finalize the plan document.
Confirm before you sign: a compensation plan is a contract, and its pay mechanics touch wage-and-hour rules wherever the practice operates.
Have a healthcare attorney review the plan and the employment agreement, and route classification questions to employment counsel or the DOL.
Bonus thresholds
A production bonus pays when an associate's measured production crosses a threshold you set in advance.
The moving parts are the threshold, the measurement period, the production definition that applies, and when the bonus is actually paid.
Every one of them belongs in the plan document, in writing, before the associate's first day.
Set the threshold from your own numbers: the schedule the associate will run and the collections that schedule can reasonably produce.
A threshold above anything the schedule can reach never pays out, and one below an ordinary month is not a bonus — it is a raise with extra steps.
Our research found no public benchmark for where a threshold should sit; the number comes from your schedule and your books.
Bonuses can also aim at the work you are trying to build.
A threshold on medical visits pulls an associate toward medical-mode practice; one on contact lens fits supports a contact lens service line.
Whatever the target, the same drafting rule applies — name the metric, the period and the payout terms exactly, so the bonus computes the same way in month twelve as it did in the offer conversation.
Keep the bonus as a lever on top of a plan that already adds up.
If the underlying percentage and base do not work at expected production, a threshold will not fix them — it just moves the argument to a new line item.
Worked examples
Two of the examples below use published survey figures; the others are pure algebra.
None of the figures is an associate benchmark — the survey numbers describe owner respondents' practices (2021 data, self-selected sample) — and the algebra carries no numbers at all, because yours come from your books.
Example: the basis changes the check.
The AOA's 2022 survey reported billings per OD in the practice averaging $847,643, with collections running at 84% of billings.
For an OD billing that amount, a percentage-of-billings formula uses a base of $847,643; a percentage-of-collections formula uses what the practice actually realizes on those billings.
Same OD, same work, two different checks — which is why the plan names its basis.
Example: what the percentage has to fit inside.
The same survey reported average gross receipts of $989,545 and, separately, practice expenses per owner of $402,636.
The survey summary does not detail what those expenses cover or put the two figures on the same basis, so they cannot be subtracted into a margin — which is why the associate's percentage is derived from your books rather than picked from a list.
Example: the algebra of a percentage plan.
Call the associate's collected revenue in the measurement period C and the plan percentage p, so the production check is C multiplied by p for that period.
When collections double, production pay doubles at the same percentage — the leverage and the risk of the model in one line.
Example: the algebra of a greater-of plan.
Start from a base B, and pay for the period is the greater of the two — the base B, or the production amount C multiplied by p, whichever comes out larger.
When production beats the base, the associate feels the upside; when a slow month drops the production amount below the base, the base holds.
A ramp variant runs the same comparison with the base switched to a guaranteed amount for the ramp period, then converts on the date the contract names.
The arithmetic is the easy half of an optometrist compensation structure.
The other half is definitional: the production clause, the measurement period, refund treatment, attribution and what happens to a part-finished period if someone leaves.
Write all of it into the plan, and have a healthcare attorney read it before the offer goes out.
This page is employer information, not legal, accounting or billing advice. Pay-structure and classification questions belong with employment counsel or the DOL's Wage and Hour Division, and contract questions with a healthcare attorney.
Terms to define before you offer a compensation plan
- The measurement basis: percentage of gross charges or percentage of collections
- The revenue lines inside the base: exams, follow-ups, contact lens fits, medical visits, optical
- How refunds, adjustments and denied claims are treated, and in which period
- The attribution rule for shared patients and co-managed care
- The measurement period, and the date production is paid out
- Whether a guarantee or draw applies, its amount, its end date and whether it is recoverable
- Any production bonus: the threshold, the period, the metric and the payout terms
- Who bears the payer-mix risk when the schedule or the payer mix changes
Questions employers ask
Should an associate optometrist be paid on gross production or on collections?
Collections are what the practice actually receives after plan allowances, denials and unpaid patient balances; gross production is what was billed. In the AOA's 2022 practice survey (2021 data, self-selected sample), owner respondents reported collecting 84% of billings on average. A percentage-of-collections plan ties the associate's pay to money received; a percentage-of-billings plan pays on charges the practice may never collect in full. Whichever basis you pick, also define how refunds and adjustments are handled.
Can an associate optometrist be paid only on production?
A plan can be written to pay entirely on production, but it hands the whole schedule risk to the associate and gives a new graduate nothing to land on during the ramp. If you want a strong incentive, a hybrid — a base plus a production share, or the greater of the two — delivers the upside while keeping a floor. Whatever structure you choose, confirm the wage-and-hour treatment with employment counsel.
What happens to production pay in a slow month or when my associate takes vacation?
That depends on how the plan measures production. A per-day basis counts only days worked, while a monthly or quarterly basis averages across the whole period, slow stretches included. This is exactly where guarantees, draws and greater-of floors do their work — and the answer should be written into the plan rather than decided case by case after the fact.
Does production-based pay affect an associate's overtime eligibility?
Not through the federal salary test. Under 29 CFR 541.304, licensed optometrists who are actually practicing are exempt learned professionals, and the FLSA's salary-level and salary-basis requirements do not apply to them. Under federal law, an employed OD paid hourly or per diem can still be overtime-exempt. State law can differ — California is one example — and independent-contractor fill-ins are a separate classification question. How your plan is treated in your state is a question for employment counsel or the DOL's Wage and Hour Division — not something to settle from a template.
More hiring resources
Hiring an associate optometrist?
Put your opening in front of ODs on a board that lists only eye care work — private practices, OD-MD groups and optical retailers post here.

