Pre-testing is the front half of the eye exam: the case history and instrument tests an optometric technician completes before the doctor takes the chair.
A pre-test workup in optometry gathers visual acuity, autorefraction, keratometry, lensometry, tonometry, visual fields and imaging, so the optometrist starts the exam with the numbers already charted.
This guide walks the sequence, the instruments and the hand-off from the technician's side.
What pre-testing is and why practices delegate it
Pre-testing is delegated clinical work.
The doctor of optometry stays responsible for the exam, while trained staff gather the history and the baseline measurements that start it.
The American Optometric Association (AOA) defines paraoptometrics as allied health staff trained to assist doctors of optometry, a group that includes opticians, contact lens staff and optical assistants.
The duties the AOA lists for paraoptometrics include pre-testing alongside front office, chairside assisting, contact lens instruction, frame styling and fitting, billing/coding, office management and vision therapy.
The logic of delegating pre-testing is a division of labor.
Technician time goes to the history, the instruments and the chart; the optometrist's chair time goes to the examination, the refraction and the treatment decisions.
Employers describe the role the same way.
Visionworks' careers page describes its in-store Optometric Assistant as trained and knowledgeable about eye health and preliminary testing, taking patients through the first steps of the eye exam visit, as the page read in October 2026.
What a technician may actually do is decided state by state, through rules on what a supervising doctor may delegate.
Kansas statute, for one, lets physicians delegate screening of visual acuity, color vision, visual fields and intraocular pressure to assistants.
That provision is about physicians: our research did not find an optometrist-specific Kansas delegation provision.
The same Kansas section says people who dispense ophthalmic materials on an OD's or MD's prescription are not 'assistants' under it.
Oregon's rule is a worked example of how a state draws the line (OAR 852-020-0060).
Optometric physicians there may delegate non-prohibited tasks to well-trained technicians under direct supervision at the practice site.
The same rule bars delegating ophthalmoscopy, gonioscopy, final biomicroscopy, final refraction, final prescription or treatment decisions, or final tonometry for a glaucoma patient.
Oregon defines that direct supervision as technician work overseen and approved by an optometric physician or MD at the practice site, with an intervention protocol in place.
New to the role itself?
The optometric technician career guide covers duties, settings and how to get hired.
On the employer side, practices ready to hire eye care staff will find role-by-role hiring guides on the hiring hub.
Delegation is state law — confirm with the board
The standard pre-test sequence
The order of a pre-test workup is not arbitrary.
Each result is charted against the ones before it, and that sequence is how the chart reads at hand-off.
Our research found no single published script for the order: practices set it in their own procedures and the doctor's preferences, so treat the sequence below as the shape of the work rather than a universal script.
O*NET's task list for ophthalmic medical technicians reads like a pre-testing menu: taking medical histories, tonometry, operating autorefractors, phoropters and tomographs, axial length measurement, visual acuity testing, lensometry, giving topical ophthalmic medications and visual field testing.
Case history
Chief complaint, medications, allergies and visual demands, captured before any instrument runs.Visual acuity
Chart acuity — Snellen and the like — plus pinhole acuity where the practice's protocol calls for one.Lensometry
The power of the glasses the patient wore in, measured and charted before any new refraction happens.Autorefraction and keratometry
An objective starting point for the refraction, plus corneal curvature readings from the keratometer.Tonometry
Intraocular pressure screening with the practice's tonometer, properly disinfected.Fields, motility and imaging
Visual fields, ocular motility, fundus photography and OCT as ordered for the visit.Diagnostic drops
Dilation or other diagnostic drops when the doctor orders them, instilled and recorded per the practice's protocol.
The order matters for reasons the technician controls.
The history decides which tests matter for this visit and what to flag; acuity anchors the chart, because later numbers are read against it; and the current glasses' measured power belongs on the chart before the doctor refracts.
The hand-off is the finish line: a chart that answers the history's questions before the exam begins.
Case history first
The history comes first because it steers everything after it: which tests the doctor will want for this visit, which findings to flag, and how the chart reads at hand-off.
The AOA's Certified Paraoptometric Technician (CPOT) exam outline spells out what a technician's case history covers.
Its items are:
- Chief complaint, with history of present illness and pain level
- Ocular and medical history of the patient and family
- Current prescription and over-the-counter medications and supplements
- Allergies
- Social history: tobacco, alcohol and substance use
- Work and school duties
- Hobbies and visual demands
For the technician, the history is the first hand-off artifact.
A medication list or a family-history note the doctor can see at a glance does more work than a long narrative no one skims, so completeness and clean charting beat storytelling.
Being on a certification outline describes what the AOA expects a trained technician to know; it is not a statement of what any state allows, which is the delegation rule that governs your practice.
Instrument tests
After the history, the instrument suite produces the numbers.
The AOA's CPOT outline lists acuity, autorefraction and keratometry, tonometry, visual fields, imaging and diagnostic drops as technician work; lensometry and ocular motility come from O*NET's task list for ophthalmic medical technicians.
The notes below stay on what the instruments measure and what the operator is expected to control.
Visual acuity.
The CPOT outline's acuity section covers Snellen, Allen figures, tumbling E and Landolt C charts, and pinhole acuity.
For very low vision, the outline covers counting fingers, hand motion, light perception and no light perception notations.
Autorefraction and keratometry.
The outline includes autorefraction and autokeratometry, including understanding the reasons an instrument returns wrong results.
Keratometers measure corneal curvature — O*NET describes the reading as aiding diagnosis of conditions such as astigmatism — and keratometry appears on O*NET's task list for ophthalmic medical technicians.
The outline also covers subjective refraction, manual or automated, at distance and near.
Exam coverage is not legal permission: Oregon keeps the final refraction and the final prescription with the doctor, and each state draws its own line on how far a technician may go.
Tonometry.
The outline expects technicians to perform tonometry with non-contact tonometers, Tono-Pen, iCare and Goldmann applanation, and to disinfect tonometers properly.
The state line shows up here too: Oregon's rule puts final tonometry for a glaucoma patient with the doctor.
Visual fields.
Automated visual field testing appears on the outline with 10-2, 24-2 and 30-2 patterns, superior lid fields, Threshold versus SITA Fast strategies and reliability indices.
Imaging.
The outline includes fundus photography and posterior-segment OCT — optic nerve versus macula, getting quality images, spotting and fixing artifacts — plus anterior-segment OCT.
Diagnostic drops.
The outline lists instilling and recording diagnostic drops, mydriatics and cycloplegics, as a technician task.
Oregon's rule explicitly lets technicians instill medication as instructed, which is what delegation of drops looks like where a state allows it.
Hand-off to the optometrist
The hand-off is where delegation meets its limit.
Everything gathered so far is data; the decisions are the doctor's.
Oregon's rule names the non-delegable core explicitly — final biomicroscopy, final refraction and final prescription and treatment decisions among them — and each state writes its own list.
The technician's closing jobs are documentation and readiness: every value charted with the instrument that produced it, the history's flags visible at the top, the room set for the doctor.
Once the doctor is in the chair, some technicians stay on as scribes.
The CPOT outline includes chairside scribing: recording the doctor's findings, diagnosis and plan in the EHR, and coding the exam.
Oregon's definition of direct supervision is the model to have in mind: technician work overseen and approved by an optometric physician or MD at the practice site, with an intervention protocol in place.
A clean hand-off is also why the sequence matters.
Gaps and out-of-order entries leave the history's questions unanswered; a chart that answers them before the exam starts is the deliverable.
Ophthalmic workup differences
In ophthalmology, the front-half work looks similar, and the job title changes with the setting.
O*NET groups ophthalmic assistant and ophthalmic technician titles in one occupation, ophthalmic medical technicians (SOC 29-2057), and defines that occupation as assisting ophthalmologists by performing ophthalmic clinical functions.
The AOA draws a distinction between paraoptometrics — its word for staff who assist doctors of optometry — and ophthalmic technicians and assistants.
The workup itself shifts with the doctor's scope.
O*NET's task list for the ophthalmic side adds cleaning or sterilizing instruments, assisting with procedures including surgery, and calling patients about post-operative recovery.
The instrument core carries over: keratometry, ocular motility and depth-perception tests and retinoscopy are on the same O*NET list, so a technician who has mastered a pre-test suite has portable skills across both settings.
The optometric vs ophthalmic technician titles breakdown covers the role seams — assistant, technician, scribe — in detail.
Career information, not medical, licensing or legal advice. What a technician may perform is set by each state's delegation rules and the supervising doctor's orders — confirm with the state board of optometry.

